Dongguan Jitian Machinery Co., Ltd.
Q Q： 281732381
Address：No. 65 Of Chiling Section,GuanTai Road,HouJie Town,DongGuan City
Plastic particle mill repair and maintenance
1. Plastic particle grinder in the daily use of the process, to always check the rotation of the disc, according to the specific provisions of the plastic particles crusher disk speed control in a reasonable range, so as to avoid the disk speed too fast And affect the granularity of the product.
2. Because the plastic particle shredder is a wet granulation model, the upper part of the disc is usually equipped with spray device, used to wet the material to increase the viscosity of the material, so to ensure that the material has good adhesion, should always check Spray device to ensure that the spray device in the water flow.
3. Plastic particle grinder in the use of the process, in particular, need to pay attention to check the plastic particles of the transmission parts, that is, transmission gears, transmission gears are rotated with the help of the completion of the oil, so the big gear Of the process, you must regularly check the lubrication of the situation, the appropriate gear for the addition of lubricants and grease, to ensure good lubrication of the gear, so that the operation of the plastic particle machine more stable and reliable.
4. The overall structure of the plastic particle shredder is supported by the frame. When the machine is running, pay attention to check whether the anchor bolts connected to the foundation and the ground are firmly and whether there is any loose phenomenon. If the bolt is loose, Timely tightening, or plastic particles machine running, will have a strong vibration and noise, and even lead to the occurrence of the accident.
5. Should check the plastic particle mill in the transport of various parts of the machine parts are missing, whether the phenomenon of loose bolts.
6. Plastic Particle Shredder Turn the spindle pulley to check for any collision.
7. Check whether the direction of rotation of the plastic particle grinder is correct after wiring the motor.
8. It is strictly forbidden to incorporate iron and debris in the crushed material.
9. plastic particles grinder found abnormal sound, should immediately stop.
10. Regular inspection of plastic particles crusher bearing lubrication phenomenon, into the lubricating oil.